Mag-Float scrapper blade Large

Now with the new version of the (Small) and (Medium) glass aquarium cleaners you are able to attach a scraper blade.  This additional piece creates the ultimate cleaning tool that will easily eliminate the tougher algae and reach the edges of the gravel and side of the tank!

Replacement scraper for the large and Large + Mag-Float (Glass Only!)
Item #00401

• Easy removal of algae from glass/acrylic surfaces
• No longer knock over decorations, damage corals and invertebrates
• No longer get your hands submerged into the water of the fish tank
• Time/money saver on maintenance
• Large cleaning surface area makes the job quick and efficient
• Stays free of debris
• Can be maintained attached to aquarium surface
• Strong, high-quality neodymium rare earth magnets
• Available for glass and acrylic aquariums
• Can be used on freshwater and saltwater tanks
• Magnet does not lose strength over time
• Easy retrieval of inner magnet

Instructions on how to change the pad/felt:

• Remove old pad/felt entirely without damaging the plastic surface of the magnet.
• Apply mineral spirits on a cloth and rub plastic surface until all excess glue is cleared (Use latex gloves).
• Wait until plastic surface is completely dry before applying new pad/felt.
• Peel back paper backing from new pad/felt approximately a quarter of the way.
• Line up the new pad/felt with the plastic surface area of the magnet.
• Apply pressure to the pad/felt are that has been peeled off so it glues on to the plastic surface of the magnet.
• Apply pressure to the rest of the new pad/felt as you slowly remove the rest of the paper backing (This will avoid any air bubbles to be formed between the plastic surface and pad/felt).

Note:

• Felt is applied to the magnet that contains the logo Mag-Float®
• Pad is applied to the magnet that does not contain the logo Mag-Float®